Online calculator - 2%, 5%, 10% SMD resistor

Resistors:

Capacitors and Inductors:

---

Calculate 2%, 5%, 10% SMD resistor: F41

Enter resistor value to get code:

Ω kΩ MΩ 2 % 5 % 10 %

Choose code to get SMD resistor value:

letter	digit	digit
Z     Y / R     X / S     A     B     C     D     E     F	0     1     2     3     4     5     6	0     1     2     3     4     5     6     7     8     9

F41

Standard SMD Resistor Values - decade 10 to 100 MΩ

2% tolerance	5% tolerance	10% tolerance
10 MΩ, 11 MΩ, 12 MΩ, 13 MΩ 15 MΩ, 16 MΩ, 18 MΩ, 20 MΩ 22 MΩ, 24 MΩ, 27 MΩ, 30 MΩ 33 MΩ, 36 MΩ, 39 MΩ, 43 MΩ 47 MΩ, 51 MΩ, 56 MΩ, 62 MΩ 68 MΩ, 75 MΩ, 82 MΩ, 91 MΩ	10 MΩ, 11 MΩ, 12 MΩ, 13 MΩ 15 MΩ, 16 MΩ, 18 MΩ, 20 MΩ 22 MΩ, 24 MΩ, 27 MΩ, 30 MΩ 33 MΩ, 36 MΩ, 39 MΩ, 43 MΩ 47 MΩ, 51 MΩ, 56 MΩ, 62 MΩ 68 MΩ, 75 MΩ, 82 MΩ, 91 MΩ	10 MΩ, 12 MΩ 15 MΩ, 18 MΩ 22 MΩ, 27 MΩ 33 MΩ, 39 MΩ 47 MΩ, 56 MΩ 68 MΩ, 82 MΩ

Other resistance decades:
0.1 - 1 Ω, 1 - 10 Ω, 10 - 100 Ω, 100 - 1000 Ω, 1 - 10 kΩ, 10 - 100 kΩ, 100 - 1000 kΩ, 1 - 10 MΩ, 10 - 100 MΩ

The SMD resistor code F41 stands for 47 MΩ / 5%, in words: fourty-seven Megaohms with five percent tolerance.

SMD resistors with a 2%, 5% or 10% tolerance can be marked using A11 format (letter followed by two digits). The letter indicates the multiplier. The digits (numbers) range from 01 to 60. They have a double function: they indicate the value and the tolerance at the same time. The numeric combinations from 01 to 24 indicate 24 values of the E24 table and a 2% tolerance. The combinations from 25 to 48 indicate 24 values of the E24 table again, but with a 5% tolerance. Finally, the combinations from 49 to 60 indicate 12 values of the E12 table with a 10% tolerance. The usage of a letter prevents the confusion with 3-digit marking system. The letter is at the beginning to prevent confusion with EIA-96 marking of +/- 1% resistors. Code "D03", for example, indicates a 120 kiloohm resistor. The number 03 indicates the 3rd value of the E24 table (120) and D indicates multiplication by 1000. The value is then 120 x 1000 = 120 000 ohms or 120 kiloohms. The number is in 01 - 24 range, so the tolerance is 2%. Code "D27" means the same value (120 kiloohms) but with a 5% tolerance, because range 25 - 48 means 5%. Number 27 is 3rd in this range, indicating the 3rd value of E24 table - value 120. Letter D indicates multiplication by 1000, just like in the previous example. Code "D51" is a 150 kiloohm resistor. The tolerance is 10%, because the number is in the 49 to 60 range. Number 51 is 3rd in this range, indicating the 3rd value of E12 - value 150. Letter D multiplies by 1000 as always. Note that 2% and 5% resistors have 24 possible values per decade, while 10% resistors only have 12 possible values per decade.



This is a simple online calculator for color band resistor marking, inductor color band marking, ceramic, film or tantalum capacitor 3 digit marking and SMD resistor 3-digit, 4-digit, 10%, 5%, 2% and EIA-96 (E96) 1% tolerance code marking.